Shure PGX Lapel
$65.00
Wireless Lavalier/Lapel Microphone
Recommended for: Hands-free audio pickup
Features: Omni-directional pickup pattern, Discrete cable and nearly invisible microphone, Bodypack is same size as deck of cards, 300 foot range and 5 hour battery life, Optional WL185 directional microphone
Description
Specifications:
System:
- Working Range 100m (300 ft.)
- Note: actual range depends on RF signal absorption, reflection, and interference
- Audio Frequency Response: +/– 2 dB (Minimum: 45 Hz, Maximum: 15 kHz)(Overall system frequency depends on microphone element.)
- Total Harmonic Distortion: 0.5%, typical (Ref. +/– 33 kHz deviation, 1 kHz tone)
- Dynamic Range >100 dB A-weighted
- Operating Temperature Range –18°C (0°F) to +50°C (+122°F)
- Note: battery characteristics may limit this range
Body Pack:
- Audio Input Level -10 dBV maximum at “mic” gain position
- +10 dBV maximum at 0dB gain position
- +20 dBV maximum at -10dB gain position
- Gain Adjustment Range 30 dB
- Input Impedance 1 Mega Ohm
- RF Transmitter Output 30 mW maximum (dependent on applicable country regulations)
- Dimensions 108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
- Weight 81 grams (3 oz.) without batteries
- Housing Molded polycarbonate case
- Power Requirements 2 “AA” size alkaline or rechargeable batteries
- Battery Life >8 hours (alkaline)
Receiver:
- Dimensions 40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.)
- Weight 327 g (11.5 oz.)
- Housing ABS
- Audio Output Level
- Ref. +/– 33 kHz deviation with 1 kHz tone
- XLR connector (into 600 ohm load): –19 dBV
- 1/4 inch connector (into 3000 load): –5 dBV
- Output Impedance XLR connector: 200 ohms
- 1/4 inch connector: 1k ohms
- XLR output Impedance balanced
- Pin 1: Ground (cable shield)
- Pin 2: Audio
- Pin 3: No Audio
- Sensitivity –105 dBm for 12 dB SINAD, typical
- Image Rejection >70 dB, typical
- Power Requirements 12–18 Vdc at 150 mA, supplied by external power supply